1.    Hoffer, A., Moncada, R. H., Lazo, B. P., Tapia, J., & Laurila, L. (2022). Calculation of a Current-Vector Trajectory for Enhanced Operation of Synchronous Reluctance Generators Including Saturation. IEEE Transactions on Industrial Electronics, 70(2), 1197-1204. Doi: 10.1109/TIE.2022.3161820 - https://doi.org/10.1109/TIE.2022.3161820

2.    Gallardo, C., Madariaga, C., Tapia, J. A., & Degano, M. (2023). A Method to Determine the Torque Ripple Harmonic Reduction in Skewed Synchronous Reluctance Machines. Applied Sciences, 13(5), 2949. Doi: 10.3390/app13052949 - https://doi.org/10.3390/app13052949

3.    Riquelme, D., Madariaga, C., Jara, W., Bramerdorfer, G., Tapia, J. A., & Riedemann, J. (2023). Study on Stator-Rotor Misalignment in Modular Permanent Magnet Synchronous Machines with Different Slot/Pole Combinations. Applied Sciences, 13(5), 2777. Doi: 10.3390/app13052777 - https://doi.org/10.3390/app13052777

4.    Madariaga, C., Gallardo, C., Tapia, J. A., Jara, W., Escobar, A., & Degano, M. (2023). Fast Assessment of Rotor Barrier Dimensional Allowances in Synchronous Reluctance Machines. IEEE Access, 11, 58349 - 58358. Doi: 10.1109/ACCESS.2023.3284753 - https://doi.org/10.1109/ACCESS.2023.3284753

5.    Escobar, A., Sánchez, G., Jara, W., Madariaga, C., Tapia, J. A., Riedemann, J., & Reyes, E. (2023). Impact of Manufacturing Tolerances on Axial Flux Permanent Magnet Machines with Ironless Rotor Core: A Statistical Approach. Machines, 11(5), 535. Doi: 10.3390/machines11050535 - https://doi.org/10.3390/machines11050535

6.    Gallardo, C., Tapia, J. A., Degano, M., & Mahmoud, H. (2022). Accurate Analytical Model for Synchronous Reluctance Machine With Multiple Flux Barriers Considering the Slotting Effect. IEEE Transactions on Magnetics, 58(9), 8107709. Doi: 10.1109/TMAG.2022.3189483 - https://doi.org/10.1109/TMAG.2022.3189483

7.    Hoffer, A. E., Petrov, I., Pyrhönen, J. J., & Tapia, J. A. (2021). Stainless-Core Submersible Permanent Magnet Synchronous Machine. IEEE Access, 9, 28089-28100. Doi: 10.1109/ACCESS.2021.3058593 - https://doi.org/10.1109/ACCESS.2021.3058593

8.    Torres, J., Peña, R., Riedemann, J., Tapia, J., Moncada, R., Jara, W., & Pesce, C. (2020). Direct power control strategy for an axial flux permanent magnet synchronous machine. Electrical Engineering, 102(1), 481-491. Doi: 10.1007/s00202-019-00889-4 - https://doi.org/10.1007/s00202-019-00889-4

9.    Hoffer, A. E., Petrov, I., Pyrhönen, J. J., Tapia, J. A., & Bramerdorfer, G. (2020). Analysis of a Tooth-Coil Winding Permanent-Magnet Synchronous Machine With an Unequal Teeth Width. IEEE Access, 8, 71512-71524. Doi: 10.1109/ACCESS.2020.2987872 - https://doi.org/10.1109/ACCESS.2020.2987872

10. Madariaga, C., Jara, W., Riquelme, D., Bramerdorfer, G., Tapia, J. A., & Riedemann, J. (2020). Impact of Tolerances on the Cogging Torque of Tooth-Coil-Winding PMSMs with Modular Stator Core by Means of Efficient Superposition Technique. Electronics, 9(10), 1594. Doi: 10.3390/electronics9101594 - https://doi.org/10.3390/electronics9101594

11. Rodriguez, C. G., Zambrano, D., Reyes, S., Tapia, J., Egusquiza, M., & Egusquiza, E. (2020). Dynamic Model for Axial Motion of Horizontal Pelton Turbine and Validation in Actual Failure Case. Shock and Vibration, 2020, 8811961. Doi: 10.1155/2020/8811961 - https://doi.org/10.1155/2020/8811961

12. Madariaga, C., Jara, W., Tapia, J., Pyrhonen, J. J., Lindh, P. M., & Riedemann, J. (2019). Closed-Form Solution for the Slot Leakage Inductance of Tooth-Coil-Winding Permanent Magnet Machines. IEEE Transactions on Energy Conversion, 34(3), 1572-1580. doi: 10.1109/TEC.2019.2908053 - https://doi.org/10.1109/TEC.2019.2908053

13. Cavagnino, A., Bramerdorfer, G., & Tapia, J. A. (2018). Optimization of Electric Machine Designs-Part II. IEEE Transactions on Industrial Electronics, 65(2), 1700-1703. - https://doi.org/10.1109/TIE.2017.2770758

14. Hoffer, A. E., Moncada, R. H., Pavez, B. J., & Tapia, J. A. (2018). A Novel Method for Finite-Element Modeling of a Commercial Synchronous Reluctance Machine. IEEE Latin America Transactions, 16(3), 806-812.

15. Bramerdorfer, G., Tapia, J. A., Pyrhonen, J., & Cavagnino, A. (2018). Modern Electrical Machine Design Optimization: Techniques, Trends, and Best Practices. IEEE Transactions on Industrial Electronics. 65(10), 7672-7684. doi: 10.1109/TIE.2018.2801805 - https://doi.org/10.1109/TIE.2018.2801805

16. Montero, M. A. T., Garces, A. E. H., Ladino, J. A. T., & Collao, R. R. W. (2017). Simulation and Analysis of an Axial Flux Induction Machine. IEEE Latin America Transactions, 15(7), 1263-1269. doi: 10.1109/TLA.2017.7959345 -https://doi.org/10.1109/TLA.2017.7959345

17. Cavagnino, A., Bramerdorfer, G., & Tapia, J. A. (2017). Optimization of Electric Machine Designs- Part I. IEEE Transactions on Industrial Electronics, 64(12), 9716-9720. doi: 10.1109/TIE.2017.2753359 -https://doi.org/10.1109/TIE.2017.2753359

18. Jara, W., Lindh, P., Tapia, J. A., Petrov, I., Repo, A. K., & Pyrhönen, J. (2016). Rotor Eddy-Current Losses Reduction in an Axial Flux Permanent-Magnet Machine. IEEE Transactions on Industrial Electronics, 63(8), 4729-4737. doi: 10.1109/TIE.2016.2547368 - https://doi.org/10.1109/TIE.2016.2547368

19. Polikarpova, M., Ponomarev, P., Lindh, P., Petrov, I., Jara, W., Naumanen, V., Tapia, J. y J. Pyrhönen, "Hybrid Cooling Method of Axial-Flux Permanent-Magnet Machines for Vehicle Applications", IEEE Transactions on Industrial Electronics 62(12), 7382-7390 (2015) - https://doi.org/10.1109/TIE.2015.2465354

20. Lindh, P., Montonen, J., Immonen, P., Tapia, J. A., & Pyrhonen, J. (2014). Design of a traction motor with tooth-coil windings and embedded magnets. IEEE Transactions on Industrial Electronics, 61(8), 4306-4314. doi: 10.1109/TIE.2013.2279126 - https://doi.org/10.1109/TIE.2013.2279126

21. Kamiev, K; Nerg, J; Pyrhonen, J; Zaboin, V; Tapia, J; " Feasibility of an Armature-Reaction-Compensated Permanent-Magnet Synchronous Generator in Island Operation"; IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS; 61(9); 5075-5085 (2014) - https://doi.org/10.1109/TIE.2013.2289871

22. Tapia, J., Pyrhönen, J., Puranen, J., Lindh, P. y S. Nyman, "Optimal Design of Large Permanent Magnet Synchronous Generators", IEEE Transactions on Magnetics, 49(1), 642-650 (2013).

23. Kamiev, K., Montonen, J., Ragavendra, P., Pyrhönen, J., Tapia, J. y M. Niemelä, "Design principles of permanent magnet synchronous machines for parallel hybrid or traction applications", IEEE Transactions on Industrial Electronics, 60(11), 4881-4890 (2013).

24. Kamiev, K., Pyrhönen, J., Nerg, J., Zaboin, V. y J. Tapia, "Modeling and Testing of an Armature-Reaction-Compensated (PM) Synchronous Generator", IEEE Transactions on Energy Conversion, 28(4), 849-659 (2013).

25. Lara, D.D., Merino, G.G., Pavez, B.J. y J.A. Tapia, "Efficiency Assessment of a Wind Pumping System", Energy Conversion and Management 52, 795-803 (2011)

26. Lindh, P., Rilla, M., Jussila, H., Nerg, J., Tapia, J. y J. Pyrhönen, "Interior Permanent Magnet Motors for Traction Application with Non-Overlapping Concentrated Windings and with Integer Slot Windings", International Review of Electrical Enginnering (IREE), 6(4), 1707-1714 (2012).

27. Moncada, R.H., Tapia, J.A. y T.M. Jahns, "Analysis of Negative-Saliency Permanent-Magnet Machines", IEEE Transactions on Industrial Electronics 57(1), 122-127 (2010)

28. González, D.A., Tapia, J.A., Wallace, R. y A. Valenzuela, "Design and Test of an Axial Flux Permanent-Magnet Machine with Field Control Capability", IEEE Transactions on Magnetics 44(9), 2168-2173 (2008)

29. Valenzuela M.A. y J.A. Tapia, "Heat Transfer and Thermal Design of Finned Frames for TEFC Variable-Speed Motors", IEEE Transactions on Industrial Electronics 55(10), 3500-3508 (2008)

30. Letelier, A.B., González, D.A., Tapia, J.A., Wallace, R. y M.A. Valenzuela, "Cogging Torque Reduction in an Axial Flux PM Machine via Stator Slot Displacement and Skewing", IEEE Transactions on Industry Applications 43(3), 685-693 (2007).

31. González, D.A., Tapia, J.A. y A. Letelier, "Design Consideration to Reduce Cogging Torque in Axial Flux Permanent-Magnet Machines", IEEE Transactions on Magnetics 43(8), 3435-3440 (2007)

32. González, D., Tapia, J. y R. Wallace, "Metodología de Control de Maquinas Eléctricas de Imanes Permanentes con Capacidad de Debilitamiento de Campo", Ingeniare. Revista Chilena de Ingeniería 15(1), 76-82 (2007)

33. Tapia, J.A., González, D., Wallace, R.R. y M.A. Valenzuela, "Axial Flux Surface Mounted PM Machine with Field Weakening Capability", En Engineering, Edit. Springer, pp. 6 (2006)

34. Tapia, J.A., González, D., Wallace, R.R. y M.A. Valenzuela, "Axial Flux Surface Mounted PM Machine With Field Weakening Capability", Recent Developments of Electrical Drives, 321-334 (2006)

35. Tapia, J.A., Leonardo, F. y T.A. Lipo, "Consequent-Pole Permanent-Magnet Machine with Extended Field-Weakening Capability", IEEE Transactions on Industry Applications 39(8), 1704-1709 (2003)